Download the Exhibitor Workshops and MicroApps Call for Presentations

Exhibitor Workshops and Microwave Application Seminars Call for Presentations

The IEEE Microwave Theory and Techniques Society’s 2017 International Microwave Symposium (IMS2017) will be held 4 - 9 June 2017 in Honolulu, Hawai‘i as the centerpiece of Microwave Week 2017. New for IMS2017 are the Exhibitor Workshops that provide IMS exhibitors a unique opportunity to present in-depth technical topics, via two-hour sessions, held in a meeting room off the exhibit floor. Exhibitor Workshop access is open to all IMS registrants for a nominal fee. Microwave Application Seminars (MicroApps) returns as a forum for IMS exhibitors to present the technology behind their commercial products and their special capabilities. MicroApps presentations will be held, on the exhibit floor, Tuesday through Thursday, 6-8 June, and are open, free of charge, to all conference and exhibit attendees. 

Exhibitor Workshops

MicroApps

Presentation Topics

State-of-the-Art Products and Processes of Interest to the Microwave Community

Presentation Length

Two Hours

10-15 Minutes

Presentation Format and Location

Workshop in Classroom-Style Meeting Room off the Exhibit Floor

Seminar in MicroApps Theater

on the Exhibit Floor

Publication Format

IMS2017 Exhibitor Workshop Digest

IMS2017 MicroApps Virtual Proceedings

Cost to IMS Exhibitor

Free (Limited to Paid IMS2017 Exhibitors)

Free (Limited to Paid IMS2017 Exhibitors)

Cost to IMS Registrant

Nominal Fee

Free

IMS2017 exhibitors are invited to submit applications engineering workshop proposals and technical paper abstracts describing state-of-the-art products and processes of interest to the microwave community, to be considered for oral presentation, as well as electronic distribution, to IMS attendees.

Submissions for Exhibitor Workshops and MicroApps presentations are limited to paid exhibitors registered for IMS2017.

Electronic Submission: Exhibitor Workshop submissions must be submitted via email to the This email address is being protected from spambots. You need JavaScript enabled to view it.. MicroApps technical papers must be submitted via email to the This email address is being protected from spambots. You need JavaScript enabled to view it..

 

Electronic Submission Deadlines: Exhibitor Workshops MicroApps
Abstract for Review: 5 December 2016 5 December 2016
Final Manuscripts: Not Applicable  17 March 2017 
Final Presentation Submission:  24 February 2017 21 May 2017
All submissions must be made through email: This email address is being protected from spambots. You need JavaScript enabled to view it. This email address is being protected from spambots. You need JavaScript enabled to view it.

 All submissions must be in PDF form – hard copies not accepted.

 

A submission must include:

1. Author information: name(s), title(s), company affiliation, telephone number, and email address.

2. A 100–300 word abstract (in English) in PDF format. No zip files. Describe the product or process, its importance to the microwave community and how it advances the state of the art in an application.

3. A statement using company letterhead authorizing IMS2017 to print your abstract and to publish your technical presentation in the IMS2017 Exhibitor Workshop Digest or IMS2017 MicroApps Virtual Proceedings and other official IMS2017 electronic publications.

The decision to accept a seminar or workshop for presentation is based on this summary, its novelty, and overall number of submissions received, as well as confirmation that your company is a registered and paid exhibitor at IMS2017.

 

Exhibitor Workshop Selection Criteria: Exhibitors are invited to submit an abstract detailing a workshop presentation. All submissions must be in English, and should outline the two-hour session, including products, processes, and techniques to be covered. Novel or noteworthy state-of-the-art components, new technologies, manufacturing and design techniques incorporating the exhibitor’s products and technologies should also be included. All submissions will be reviewed by the Exhibitor Workshop Committee. Workshops are open to all IMS registrants for a nominal fee and should appeal to the exhibit attendees. The selection criteria include: relevance and interest to MTT-S members and IMS2017 exhibition attendees, cross section and novelty of topics, and equitable representation of exhibitors.

MicroApps Selection Criteria: Exhibitors are invited to submit an abstract detailing an applications presentation. All submissions must be in English, and may cover new products, noteworthy state-of-the-art components, new technologies, and manufacturing and design techniques incorporating the exhibitor’s products and technologies. All submissions will be reviewed by the MicroApps Committee. Papers are open to all IMS registrants and should appeal to the exhibit attendees. The selection criteria include: relevance and interest to MTT-S members and IMS2017 exhibition attendees, novelty of topic (avoidance of duplicate material from prior years), and equitable representation of exhibitors.

 

Exhibitor Workshop Presentation Format: PowerPoint Presentation formats are flexible. AV equipment including projector & screen with audio inputs will be available. Workshops take place in designated meeting rooms on Level 3 of the Hawaii Convention Center. Seating will be arranged in classroom style. Workshops are two-hours in length. Presentation schedule will be set by the Exhibitor Workshop Committee. The file for the electronic media should not exceed 100MB. Additional materials may be distributed to participants at the time of the Workshop. Presentation should be by digital projection using either your own laptop or the session PC and are due 24 February 2017. 

MicroApps Presentation Format: PowerPoint presentations (or their equivalent PDF output) are required. Embedded animations/videos are encouraged. The presentations are made in the MicroApps Theater located on the exhibit floor. Acoustics will be employed that permit everyone inside the theater to hear the presentation and exhibitors outside to conduct normal business. Your company will be given the opportunity to invite people to hear your presentation using a free IMS2017 “Exhibition Only” pass. For an additional fee, presentations will be recorded and original files will be provided to your company following IMS. Seminar presentations are typically 10–15 minutes in length. Time allocations for each presentation will be set by the review committee. Allotted presentation time may be reduced for multiple submissions from the same exhibitor. The file for the electronic media should not exceed 100 MB. The electronic media is offered free of charge to all MicroApps attendees. Presentation should be by digital projection using the session PC and are due by 21 May 2017. 

Notification: Exhibitor Workshop and MicroApps authors will be notified, by email, of the evaluation results in February 2017.

 

MicroApps and Exhibitor Workshops Suggested Areas of Interest

(other topics will also be considered)

The objective of Exhibitor Workshops and MicroApps are to reach the diverse audience of young engineers and technicians, as well as industry veterans, from around the world. Workshops, tutorials and application notes on basic techniques and fundamental knowledge are encouraged. Exhibitor Workshops and MicroApps are intended to communicate practical knowledge; marketing, sales, and purely theoretical presentations are strongly discouraged. Presenters are encouraged to invite attendees to visit their exhibit for further discussion following their Exhibitor Workshop or MicroApps presentations.

 

CAE/CAD and Modeling Products and Techniques

  • Design for testability
  • Design for manufacturability
  • Device or system design

Sub-Assemblies

  • Hybrids and modules
  • Microwave systems
  • Wireless and cellular communications
  • Broadband communication
  • Sensors and sensor systems
  • RFID
  • 4G and 5G
 
 Mechanical and Passive Components
  • Transmission lines
  • Filters and multiplexers
  • Ferrite and acoustic components
  • Conventional passive devices
  • MEMS components and technologies
 Calibration, Instrumentation and Test  Measurement Techniques
  • Novel measurement techniques
  • Assembly test techniques
  • Basic RF and microwave “how-to” test procedures
  • Wafer and die RF probe
  • Extreme environments evaluation
 Active Components
  • Digital and mixed signal circuits
  • Oscillators and frequency sources
  • RF power devices and amplifiers
  • Low noise receivers and components
  • Monolithic microwave integrated circuits (MMIC)
  • New semiconductor technologies
  • Optoelectronics for microwave / millimeter-wave applications
  • Superconducting components and technology
  • Switches, phase shifters, limiters, mixers, frequency multipliers
  • Terahertz devices
 Packaging and Interconnects

 

 Manufacturing Processes

 


 

 

 

 

 

 


Download the IMS2017 Call for Papers

Deadline: The deadline for submission is 5 December 2016. 

Paper submission: Authors are invited to submit technical papers describing original work and/or advanced practices on radio-frequency, microwave, millimeter-wave, and terahertz (THz) theory and techniques.

Papers should be 3 pages in length (PDF format), and should not exceed 2 MB in file size. Hardcopy and email submissions will not be accepted. Authors must adhere to the format provided in the conference paper template available on the IMS website. It is the authors’ responsibility to obtain all required company and government clearances prior to submission. Please don’t wait until the last day to start the paper submission process. Those unfamiliar with the process may encounter paper formatting or clearance issues that may take time to resolve. 

A double-blind review process will be used to ensure anonymity for both authors and reviewers.

Papers will be evaluated on the basis of originality, content, clarity, and relevance to IMS. For accepted papers, the electronic submission of a final manuscript along with a copyright assignment to the IEEE will be required no later than 27 February 2017.  Symposium proceedings will be recorded on electronic media and archived in IEEE Xplore. Authors of accepted papers should consider submitting an extended version of their IMS paper for possible publication in the IEEE Transactions on Microwave Theory and Techniques.

Emerging technical areas: IMS2017 enthusiastically invites submission of papers that report state-of-the-art progress in technical areas that are outside the scope of those specifically listed in this Call for Papers, or that may be new to IMS, but are of interest to our attendees.

Special sessions, workshops, panel and rump sessions, and short courses: Topics being considered for these areas include Next Generation Wireless Systems (5G and beyond), Internet of Space, Latest Technologies for RF/Microwave Measurements, and Advances in RFIC Technology. Proposals must be received by 6 September 2016.

Student paper and student design competitions: Eligible students are encouraged to submit papers for the student paper competition. The papers will be evaluated using the same standards as all contributed papers. In addition, eligible students or student teams are invited to participate in student design competitions during IMS2017, which are organized and sponsored by various Technical Committees of the MTT-S Technical Coordination Committee (TCC).

MicroApps: MicroAppsand exhibitor workshops: The Microwave Application Seminars (MicroApps) serve as a forum for IMS exhibitors to present technology behind their commercial products and special capabilites. New for IMS2017 are Exhibitor Workshops, which offer IMS exhibitors a chance to present in-depth technical topics, via two-hour sessions, in a meeting room off the exhibit floor. Both presentation formats are open to all conference and exhibit attendees — MicroApps are free of charge and Exhibitor Workshops require a nominal fee. Please refer to the Call for Presentations for more information.

With demonstrations from Automatic, Broadcom, EERO, Maja Systems, Rohde & Schwarz, Zentri and a multiplayer VR Mission to Mars, the Wireless Wonders Pavilion is sure to be a highlight of IMS2016! From wearables to smart home monitoring systems, Media Partner, Wireless Design & Development will be showcasing a multitude of innovative, end-user wireless devices. 

Join us in Booth 1800 on the IMS Exhibition floor! See below an overview of pavilion! 

Virtual Reality Interactive Mars Exploration Vehicle (MEV) Experience:
The MEV game is a cooperative interactive experience played by three people.​ ​Players begin the experience by taking a seat around a stylized command console​ which is made to look like the inside of a planetary exploration vehicle. Each player​ is fitted with a VR headsets and headphones with a mic.​ ​They are instantly transported to the cockpit of a Mars exploration vehicle. Each player finds themselves looking out the window to see space and the planet Mars below. As the player looks around the vehicle they see 3D digital avatars of their co-players, a cup of coffee, inside the vehicle a bobble head of one of the games creators and their console. At this time the moderator explains the game and control panel.

In this VR world each person had a display screen with four controls which operated the vehicle. As the players land on Mars surface in their vehicle the game begins. Instructions appear on each players screen notifying them of the commands that need action. The trick was that no-one knows who has which control functions. So players need to verbally communicate amongst themselves in order to manipulate the controls which in turn operate the vehicle. Hilarity ensued as they work together, potentially yelling over each other's commands to activate the correct sequence to keep the exploration vehicle moving forward. Missed or slowly executed commands affect the vehicles speed and results in a lower overall time to complete the mission — or worse, getting engulfed by the dust storm chasing them. A leaderboard of individuals on each team’s gameplay performance keeps track of the fastest team creating both a fun co-operative team-base game and a competitive incentivize scenario for the broader show duration. 

IEEE Mars Mission 4 player VR Experience at CES2016 from Globacore on Vimeo.

Automatic Labs:

Automatic is a Smart Driving Assistant that can save you money on gas, remember where you parked, and even call for help in a crash. Our Mission: To empower drivers with knowledge about them.
 
eero:
The first home WiFi system, eero blankets customers’ homes in fast, reliable WiFi. Instead of a single router, eero uses multiple access points placed throughout your home to create a wireless mesh network that covers every room. 
 
Maja Systems/Rhode & Schwarz:
The Engine for 5G meeting IoT: active antenna and multi-gigabit links. Rohde & Schwarz and Maja Systems will be demonstrating the latest 
in mmW gigabit connectivity and best test practices with frequency, spectrum and modulation analysis.
 
QCA:
We connected the phone to the Internet, making it smart, and now we’re bringing cognition to devices. That means devices that don’t just think, but instinctively react to their surroundings. We are Qualcomm and we are bringing the future forward faster.
 
Zentri:
A secure, API-based, flexible platform that contains a revolutionary OS purpose-built for commercial grade IoT. All the key ingredients to connect your product, create a dashboard to manage and monitor in-field products and quickly build highly responsive mobile apps for your customers.

 

 

There’s a lot to see this week at Moscone Center! 

Visit both the International Microwave Symposium (IMS) and Display Week Exhibitions Free of Charge!

DW2016 logo

 

IMS2016 Attendees:

Would you like to see the OLED, LCD, and quantum dot technology that will be powering our TVs and mobile phones in the near future? Visit the Display Week exhibition floor to find out about the latest electronic displays (and see some beautiful cutting-edge devices like flat-panel TVs, e-Readers, smartphones, and more).

 Register in the North Hall Upper Lobby using this code: “rGJZUsGa” to visit Displays Week exhibition free of charge.

 

2016 IMS Logo tagline

Display Week Attendees:

Curious about Microwave and RF technologies?  Attend the International Microwave Symposium exhibition and see the latest microwave and RF products for wireless systems and applications.

 Register in the South Hall Upper Lobby using this code:  “DW2016CP” below to visit the IMS2016 exhibition free of charge.

Subcategories

description